Lease for as low as $/week
1-4 DAYS DELIVERY
RICH SOLAR
BRAVO Waterproof 8 | 8 Amp Waterproof PWM Solar Charge Controller | Waterproof 20A 12V PWM Controller for RVs, Trailers, Campers, Vans, Boats, Off-Grid | #1 Waterproof Solar Controller
$29.99
In Stock
Sold out
CODE: RS-PWM8
Categories: Best Sellers!
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE
- Description
- Shipping and Refund
Tech Specs
ELECTRICAL PARAMETERS
| Rated solar panel amps: | 8AMP Max. |
| Normal input Solar cell array voltage: | 15-22VDC |
| Max. solar cell array voltage (output has no load): | 25VDC Max. |
| The controller lowest operating voltage (at solar or battery side): | 9VDC Min. |
| Standby current consumption at night | 2mA Max. |
| Maximum voltage drop-Solar panel to battery: | 0.25VDC Max. |
CHARGING CHARACTERISTICS
| Minimum battery start charging voltage: | 3VDC Min. |
| Soft start charging voltage: | 3-10±0.2VDC |
| Soft start charging current (50% PWM duty): | Up to 4AMP |
| Bulk charge voltage: | 10-14±0.2VDC |
| Equalization charging voltage at 25 ℃ | 15.5±0.2VDC |
| Equalization charging timer timed out: | 2 Hours |
| Battery temperature compensation coefficient | -24mV/°C |
| Temperature compensation range: | -20~+50°C |
PROTECTION
| Over temperature protection during charging: | 65°C |
ELECTRICAL PARTS
| Input output terminal: | M4 terminals |
PHYSICAL PARAMETERS
| Controller material: | Plastic, Standard ABS |
| Power terminal maximum stranded wire size: | #12AWG stranded-3mm² |
| Mounting: | Vertical wall mounting |
| IP grade: | IP65 |
| Net weight: | Approx. 0.2kg/0.44lb |
ENVIRONMENTAL CHARACTERISTICS
| Operating temperature: | -25~50°C(-13～122℉) |
| Storage temperature: | -40~85°C(-40～185℉) |
| Operating Humidity range: | 100% no condensation |
User Manual & Specification
8 Amp PWM Solar Charge Controller
FEATURES AND ADVANTAGES
- PWM technology, switching control by MOSFET
- Common Positive Grounding connection
- High efficiency and low power consumption
- Battery type setting via DIP switch
- Smart charging control
- Charging time management
- LED indication for the battery condition and charging status
- Thermal protection
- No sparks
- Waterproof
- Corrosion-resistant terminals and connectors.
- Conformal coating supplied to the inside board against moisture
- Overvoltage protection, Short circuit protection, Reverse polarity protection
- Suitable for most of the rechargeable Lead acid battery, including Flooded (WET), AGM, GEL, Lithium (LiFePO4) battery
- Designed according to CE standards, EMC, and FCC compliance
MOUNTING THE DEVICE
The quickest and easiest way to mount the unit is to use the three plastic spacers and self-tapping screws supplied and mount
the unit to a flat surface.
Tech Specs
ELECTRICAL PARAMETERS
| Rated solar panel amps: | 8AMP Max. |
| Normal input Solar cell array voltage: | 15-22VDC |
| Max. solar cell array voltage (output has no load): | 25VDC Max. |
| The controller lowest operating voltage (at solar or battery side): | 9VDC Min. |
| Standby current consumption at night | 2mA Max. |
| Maximum voltage drop-Solar panel to battery: | 0.25VDC Max. |
CHARGING CHARACTERISTICS
| Minimum battery start charging voltage: | 3VDC Min. |
| Soft start charging voltage: | 3-10±0.2VDC |
| Soft start charging current (50% PWM duty): | Up to 4AMP |
| Bulk charge voltage: | 10-14±0.2VDC |
| Equalization charging voltage at 25 ℃ | 15.5±0.2VDC |
| Equalization charging timer timed out: | 2 Hours |
| Battery temperature compensation coefficient | -24mV/°C |
| Temperature compensation range: | -20~+50°C |
PROTECTION
| Over temperature protection during charging: | 65°C |
ELECTRICAL PARTS
| Input output terminal: | M4 terminals |
PHYSICAL PARAMETERS
| Controller material: | Plastic, Standard ABS |
| Power terminal maximum stranded wire size: | #12AWG stranded-3mm² |
| Mounting: | Vertical wall mounting |
| IP grade: | IP65 |
| Net weight: | Approx. 0.2kg/0.44lb |
ENVIRONMENTAL CHARACTERISTICS
| Operating temperature: | -25~50°C(-13～122℉) |
| Storage temperature: | -40~85°C(-40～185℉) |
| Operating Humidity range: | 100% no condensation |
User Manual & Specification
8 Amp PWM Solar Charge Controller
