2022-26 1500 Refresh Chevrolet Silverado Refresh Radar Detector Harness

FitsThis harness is for installing your radar detector into your 2022-26, refresh Chevrolet Silverado 1500.  This harness saves you from splicing and/or entering pins into your trucks wiring harness.  

Please select your appropriate mirror option when ordering as the harnesses are different.  For those of you with the manual dim mirror (1500 models), the harness will connect into the moisture sensor jumper harness which is also located behind the plastic windshield trim.  There are some manual dim models (such as the WT and Custom Trail Boss models) that are not using a moisture sensor, if unsure, please email us your vin#, prior to ordering, and we will confirm for you.  

This harness is for all radar detectors that use a phone cord style connector (RJ11).

-EXTRA LEAD OPTION: Harness is also available with a separate power and ground wire for those that may want to add in a dash cam or such.  Please note that these loose leads are an ignition based 12 volt feed and ground.  Most dash cams and such require 5 volts and you will need to make sure and use a voltage converter if needed.  This is not included with this harness.

 Please type in your vin# below and we will confirm that you have selected the correct harness

WILL NOT WORK ON EV MODELS "THAT HAVE A MANUAL DIM MIRROR".

Fits 22 Refresh 1500

Fits 23-26 1500 models

Fits EV models with the auto dim or live camera mirror

Product Overview: 

Install Guide: Auto Dimming Version