Lease for as low as $/week
1-4 DAYS DELIVERY
deaf bonce
Deaf Bonce Machete Fight 350.4 – 2000W RMS 4-Channel Class D Car Amplifier
$359.90
In Stock
Sold out
CODE:
Categories: 4-channel amps, all, Best Sellers!, Car Amplifiers, Car Audio, deaf bonce, FOUR CHANNEL
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE
- Description
- Shipping and Refund
Deaf Bonce Machete Fight 350.4 – 2000W RMS 4-Channel Class D Car Amplifier
Massive Power for Loud Car Audio Systems
The Deaf Bonce Machete Fight 350.4 is a high-power 4-channel Class D car amplifier designed for serious car audio systems that need big power for midrange speakers, midbass drivers, compression drivers, tweeters, or other high-output speaker configurations.
Delivering up to 500 watts RMS per channel at 2 ohms, the Machete Fight 350.4 provides an incredible 2,000 watts RMS total output while maintaining the flexibility of a four-channel amplifier.
Need even more power? Bridge the amplifier to produce an impressive 1,000 watts RMS × 2 at 4 ohms.
Whether you're building a loud daily driver, stunt wall, door speaker setup, demo vehicle, or high-output SPL-style system, the Machete Fight 350.4 gives you the power and tuning capability to make your front stage BE HEARD.
🔥 Power Ratings
RMS Power @ 4 Ohms: 350W × 4
RMS Power @ 2 Ohms: 500W × 4
RMS Power Bridged @ 4 Ohms: 1,000W × 2
Total RMS Output: Up to 2,000 Watts
Amplifier Class: Class D
Channels: 4
Minimum Stereo Impedance: 2 Ohms
Minimum Bridged Impedance: 4 Ohms
RMS ratings measured at 14.4V.
🔊 500 Watts RMS × 4 at 2 Ohms
The Machete Fight 350.4 isn't your typical four-channel amplifier.
At a 2-ohm load, it delivers an enormous:
500 WATTS RMS × 4 CHANNELS
That's up to 2,000 watts RMS available for a high-output speaker system.
This makes the Fight 350.4 an excellent amplifier for powering multiple high-efficiency Deaf Bonce Apocalypse or Machete midrange speakers, along with other high-power aftermarket speakers.
Always verify the impedance and RMS power handling of your speakers before installation.
⚡ 1,000W × 2 Bridged Power
Need a powerful two-channel configuration?
Bridge the Machete Fight 350.4 and it can deliver:
1,000 Watts RMS × 2 @ 4 Ohms
This gives installers additional flexibility when designing high-powered custom car audio systems.
🎚️ Built-In HPF + LPF Crossover Control
One of the strongest features of the Fight 350.4 is its flexible onboard crossover system.
The amplifier provides:
High-Pass Filter: 50–12,000 Hz
Low-Pass Filter: 50–12,000 Hz
Crossover Slope: 12 dB/Octave
Simultaneous HPF + LPF Operation: Yes
Because the HPF and LPF can operate simultaneously, the amplifier can create a band-pass frequency range.
That's especially useful when powering midrange or midbass speakers because you can control both the lowest and highest frequencies sent to the drivers.
🚨 Built for Loud Door Speaker Systems
If you're building a truck or car with multiple high-output speakers in the doors, pillars, custom panels, roof rack, or enclosure, the Machete Fight 350.4 gives you serious power from a single amplifier.
Great for systems using:
- Deaf Bonce Apocalypse speakers
- Deaf Bonce Machete speakers
- High-power midrange speakers
- Pro audio speakers
- Midbass drivers
- Compression drivers
- Custom door speaker builds
- Multi-speaker truck systems
- Loud daily-driver systems
- Competition and demo builds
🛡️ Protection & Reliability
High-output amplifiers need proper protection.
The Machete Fight 350.4 incorporates protection against conditions including thermal overload, electrical overload, and speaker short circuits.
It also features Power, Protect and Clipping indicators, helping installers monitor amplifier operation and properly set up the system.
📋 Machete Fight 350.4 Specifications
Brand: Deaf Bonce
Series: Machete Fight
Model: Fight 350.4
Amplifier Type: 4-Channel
Amplifier Class: D
Total RMS Power: Up to 2,000W RMS
RMS @ 4Ω: 350W × 4
RMS @ 2Ω: 500W × 4
Bridged @ 4Ω: 1,000W × 2
Minimum Impedance – Stereo: 2Ω
Minimum Impedance – Bridged: 4Ω
Frequency Response: 10–20,000 Hz
Signal-to-Noise Ratio: 90 dB
Input Sensitivity: 0.3–8V
Damping Factor: 48
HPF: 50–12,000 Hz
LPF: 50–12,000 Hz
Crossover Slope: 12 dB/Octave
Simultaneous HPF/LPF: Yes
Operating Voltage: 9–16.5V
Speaker Output Terminal: 10 AWG
Dimensions: 12.72" × 6.1" × 2.09"
Metric Dimensions: 323 × 155 × 53 mm
⚠️ Installation Recommendation
This is a high-current 2,000-watt RMS amplifier, so your electrical system and wiring need to be properly sized for the installation.
Use quality power and ground cable, proper circuit protection, solid grounding points, and correctly matched speaker impedance.
High-powered systems may also require electrical upgrades depending on the vehicle, charging system, battery capacity, additional amplifiers, and listening habits.
Professional installation is recommended for maximum performance and reliability.
Why Buy the Deaf Bonce Machete Fight 350.4?
If you're searching for a powerful 4-channel amplifier for Deaf Bonce speakers, the Machete Fight 350.4 provides the output needed for serious high-volume car audio.
With 350W × 4 at 4 ohms, 500W × 4 at 2 ohms, 1,000W × 2 bridged, Class-D efficiency, and adjustable HPF/LPF crossovers, this amplifier is built for customers who want considerably more output than a conventional four-channel amp.
